Using an airless pump may seem complicated at first, but by following a few key steps and taking a few precautions, you can achieve professional results when spraying paints or other coatings in a very short time. Here is a general guide on how to use an airless pump:
1. Preparation of the Work Area:
- Make sure the area where you are working is well ventilated.
- Protect surrounding surfaces with tarpaulins or painter’s tape to avoid any unwanted splashes.
- Wear protective clothing, safety goggles, gloves and a dust mask.
2. Preparation of the Material:
- Choose the appropriate paint or coating for your project.
- Mix the material thoroughly according to the manufacturer’s instructions. This may require the use of a mechanical or manual stirrer.
3. Preparing the Airless Pump
- Check that the airless pump is in good condition and clean.
- Check the filter and clean it if necessary.
- Check that the nozzles are clean and in good condition.
4. Adjusting the Airless Pump:
- Set the pressure of the airless pump according to the specifications of the manufacturer of the material you are using.
- Select the appropriate nozzle size to achieve the desired flow and spray pattern.
5. Spray test:
- Carry out a spray test on a test surface to adjust the pressure and check the consistency of the paint.
- Make any adjustments necessary to achieve even spraying.
6. Effective spraying:
- Keep the pump gun at a constant distance from the surface to be painted.
- Slightly overlap the passes to avoid streaking.
- Move the gun evenly while maintaining a regular pattern.
7. Cleaning After Use:
- Clean the pump immediately after use according to the manufacturer’s instructions. Use water or the recommended solvent for the type of paint used.
- Clean the nozzles, filter and other components to avoid clogging.
8. Maintenance:
- Carry out regular maintenance of the airless pump in accordance with the manufacturer’s instructions.
- Inspect and replace worn or damaged parts.
9. Security:
- Always follow the manufacturer’s safety guidelines and use the necessary protective clothing.
- Switch off the pump when you are not using it and when making adjustments.
By following these steps and paying attention to the specific instructions of the manufacturer of the airless pump and the coating material, you will be able to use the pump successfully for a variety of painting or coating spraying projects.
Don’t miss all our monthly insights on our blog: you can find them all here!